Pixelfox Slicer

Bambu Lab
P1S 256 × 256 × 250 mm · .gcode.3mf
X1 Carbon 256 × 256 × 250 mm · .gcode.3mf
P1P 256 × 256 × 250 mm · .gcode.3mf
A1 256 × 256 × 256 mm · .gcode.3mf
A1 mini 180 × 180 × 180 mm · .gcode.3mf
Creality
Ender-3 V3 SE 220 × 220 × 250 mm · .gcode (Marlin)
Ender-3 V3 KE 220 × 220 × 245 mm · .gcode (Klipper)
K1C 220 × 220 × 250 mm · .gcode (Klipper)
K1 Max 300 × 300 × 300 mm · .gcode (Klipper)
Prusa
MK4S 250 × 210 × 220 mm · .gcode (Marlin)
CORE One 250 × 220 × 270 mm · .gcode (Marlin)
MINI IS 180 × 180 × 180 mm · .gcode (Marlin)
MK3S 250 × 210 × 210 mm · .gcode (Marlin)
Snapmaker
A350 320 × 350 × 325 mm · .gcode (Marlin)
A250 230 × 250 × 230 mm · .gcode (Marlin)
Artisan 400 × 400 × 400 mm · .gcode (Marlin)
Elegoo
Neptune 4 Pro 230 × 230 × 265 mm · .gcode (Klipper)
Centauri Carbon 256 × 256 × 256 mm · .gcode (Klipper)
Anycubic
Kobra 3 255 × 255 × 260 mm · .gcode (Klipper)
Kobra S1 250 × 250 × 250 mm · .gcode (Klipper)
Qidi
Q1 Pro 245 × 245 × 240 mm · .gcode (Klipper)
X-Plus 4 305 × 305 × 280 mm · .gcode (Klipper)
Voron
2.4 350 350 × 350 × 325 mm · .gcode (Klipper)
Other
Generic 220 × 220 × 250 mm · .gcode (Marlin)

Objects on plate :n

No objects on this plate yet.

Dimensions: -
Triangles: -

Rotate

Scale

Plate

Profile

Layer height, speeds and top layers as in Bambu Studio.

Wall loops?

Top layers?

Bottom layers

Seam

Infill density

Pattern

Support

OffPlate onlyEverywhere

Simple supports below overhangs, one layer gap to the part.

Threshold angle?

Adhesion?

Brim width

FilamentsUp to eight – with an AMS the printer changes automatically.

Parts

Colour change by heightFrom this height on everything prints with the chosen filament.

Build plate

Bed

°C

Speed?

Applies as soon as a plate uses several filaments – by parts, painting or colour changes.

Prime tower?

Position

Tower width

Prime volume?

mm³

Tower brim

Flush into infill?

Flush amount on colour change?

Paint depth?

This printer brings start sequence, cleaning and bed levelling from its own profile – they run as the manufacturer intends.

Timelapse

OffNormalSmooth

Recording only happens if timelapse is enabled at print start on the printer or in Bambu Handy. “Smooth” moves the head to the camera every layer – without a prime tower a faint seam may appear where it returns.

Bed levelling

Ask at startAlwaysNever

“Ask at start” uses the choice in the print dialog. “Never” saves about a minute but needs a well calibrated plate.

Purge at start

How much filament is purged into the chute after loading. Less saves material but may leave traces of the previous colour.

Nozzle cleaning?

Purge line?

Vibration check?

Size 3 mm Edge angle 30° up to 4 mm²

Left drag: paint · Right drag: rotate · Shift: pan · Wheel: zoom

Dimensions: -
Print time: -
Filament: -
Layers: -
Material cost: -

- -

Outer wall Inner wall Top surface Bottom surface Solid infill Sparse infill Bridge Internal bridge Support Support interface Brim Prime tower Skirt

Drop a model here

STL, 3MF or OBJ – the model is placed on the P1S plate and can be sliced right away.

Everything runs in your browser. Nothing is uploaded.

Release to open

Slicing …

Loading 3D view …

Download

File: -
Plates: -
Print time: -
Filament: -
Layers: -
Profile: -
Material: -

The .gcode.3mf prints directly: copy it to the SD card, send it with “Print” in Bambu Studio or open it in Bambu Handy.

Copy the G-code to the SD card or upload it through your printer interface (OctoPrint, Mainsail, Fluidd …). Speeds are capped for ordinary printers.

The .gcode.3mf contains every sliced plate – Bambu Handy and the printer let you pick the plate at start.

Help

How it works

Open models: drop files on the view or choose “Open” (STL, 3MF, OBJ – several at once). Each file becomes an object on the active plate.
Click objects to rotate, move, copy them or put them on another plate. “+” at the top left adds another plate.
Pick your settings (default: P1S, 0.20 mm Standard, PLA, Textured PEI) and hit “Slice”.
Check the preview layer by layer, then download the .gcode.3mf and print.

View

Drag: Rotate view
Right-drag / Shift + drag: Pan view
Mouse wheel / pinch: Zoom
F: Frame the view: angled view, model centred
↑ ↓: Change layer in the preview
W E: Click the model, then W = move, E = rotate, Esc = deselect
P: Paint: P, then C/S/T/G/H/L = circle/sphere/triangle/fill/height/gaps, X = eraser, 1–8 = filament, [ ] = size, Ctrl+Z
Cmd/Ctrl + D · Entf: Copy / remove object
Cmd/Ctrl + O: Open file

Limits

A simple slicer: no prime tower (the AMS purges into the chute), no tree supports and no adaptive layer height.
Simple supports instead of tree supports; for difficult overhangs Bambu Studio is the better choice.
Walls thinner than one line width (≈ 0.45 mm) are not printed; there is no gap fill.
Check the preview before important prints – especially bridges, overhangs and the first layer.

Everything runs locally in your browser · v1.0.0